Tenergy Smart Universal Charger for NiMH / NiCd Battery pack 7.2V - 12V with charging current Selection/Temperature Sensor by Tenergy
(50)
New!: $19.97 (as of 03/15/2013 20:55 PST)
7 Used! | New! from $15.00 (as of 03/15/2013 20:55 PST)
12V
Accessories Included
* 1 standard Tamiya Female connector and Fuse house with the smart battery charger.
* 1 connector adaptor from standard Male Tamiya to Mini Female.
* 1 set of clip adaptor with Male Tamiya connector on one end.
* 2 additional fuses
Smart Charger Specification
* FOR 6V-12V NI-MH/NI-CD BATTERY PACK 6-10PCS BATTERY
* Input: AC100-240V
* Output: 6-12V 0.9or1.8A
Operation Instruction
* Connect battery pack to output connector and plug AC power source.
* Make sure battery polarity is connected correctly (Red wire is positive)
* Charger will detect battery voltage automatically, Red LED will be on during charging
* When battery is fully charged, current will reduce to trickle charging at 50mA,Green LED will be on
* Battery will be charged at 0.9A or 1.8A constant current,
* Approximate Charging time is about 1.5hrs for 3000mAh battery,1hr for 1800mAh battery.
* The charger is designed for faster charging NiCd and NiMH battery packs from 6 to 12V for RC car/Air and Air soft gun.
* Don't charge battery packs with voltage less than 6V or voltage greater than 12V and capacity smaller than1100mAh.
* Battery pack must be made by high drain current cell.
* Please contact your seller for instruction. Mfg is not responsible for any damage and consequent damage by Misusage.
Caution
* The charger is designed for indoor use only. Don't leave the charger unattended during charging.
* The Charger should be positioned horizontally and work in well ventilated condition, avoid water and keep it away from flammable explosive goods.
* Don't cover the charger when charging, ambient temperature shall not be more than 40oC
* Don't touch the plug.
* Don't leave the abtteries and chargers on wood surface or carpet.
* Cut off the power supply before connect or disconnect the charger with batteries.
* Don't try to disassemble the charger, High voltage inside, danger!
- Brand: Tenergy
- Model: 01005
- Best Charger for charging all RC Car, RC air and Airsoft battery packs 7.2V, 8.4V, 9.6V and 12V.
- Fast charger with current switch to select either, 0.9A and 1.8A. Deliver full charge within 1 - 2 hours.
- Worldwide usage with 120-240V AC.
- Use pulse and negative pulse technology to avoid battery overheating during fast charging, optimized for battery pack's cycle life.
- Safety protection fuse for over current, short circuit & reverse polarity protection
Description #1 by eBid - batteriesinaflash:
Tenergy Universal Smart 3A Hybrid Charger NiMH NiCD 7.2V 12V Features 7.2V 12V Airsoft Smart Hybrid Charger 1A 3ASpecification Rated output voltage 17.8V 0.2VOutput voltage 7 V DC 18.5V DC Switchable output current Battery Size Charge Current0.8Ah 15Ah (1A current)1.6Ah 30Ah (2A current)2.4Ah 45Ah (3A current)Charge 7.2V 8.4V 9.6V 10.8V and 12V battery packs.Charge current 3A 0.2A 2A 0.1A 1A 0.1AMax. delivered power 54WAuto switching AC Adaptor input 100 240VAC 50 60HzRated input current 0.55Amps (220VAC input and full load)Maximum power consumption 68WAccessories Included1 standard Tamiya Female connector.Alligator clips (red + black).Temperature sensor (NTC) cable.CautionThe charger is designed for indoor use only. Don t leave the charger unattended during charging.The Charger should be positioned horizontally and work in well ventilated condition, avoid water and keep away from flammable explosive goods.Don t cover the charger when charging, ambient temperature shall not be more than 40oCDon t touch the plug.Don t leave the batteries and chargers on wood surface or carpet.Cut off the power supply before connect or disconnect the charger with batteries.Don t try to disassemble the charger, High voltage inside, danger!SpecificationsOutput Voltage 7 18.5VInput Voltage 100 240VCharge Rate 3ABrand TenergyBatteries Included No Compatibility CROSS REFERENCE Terms & Conditions Shipping & Handling We make every effort to get your order to you in a flash. In stock items are shipped if order is received before 1pm PST. Please note that orders made after 1 00 PM (Pacific Standard Time) will be entered the next day. Weekend orders (from Friday after 1 00 PM) will be processed on Monday. If there is a problem with your order, you will receive an e mail within one business day to advise you about the situation. WE combine shipping! WE ship to APO and PO Box addresses! We ship Internationally. Please email us for shipping rates if they are not provided in the listing. Delivery Confirmation All orders shipped within the United States including Hawaii and Alaska are sent using USPS unless customer requests otherwise. All USPS orders within the United States are sent with USPS Delivery Confirmation. You can click on the link to more about Delivery Confirmation. Shipping Method (Domestic) We ship via UPS and USPS. You have the option of choosing which carrier you prefer for your purchase to be shipped. Shipping fee is dependent on the weight of the product in your order. Shipping Method (International) Contact us with your location for accurate shipping. Buyer is responsible for any and all charges incurred by customs. Taxes Nevada sales tax of 8.1% will apply to orders shipped to an address in the State of Nevada. Contact Us Office Hours Monday Friday 8am 6pm, Saturday Sunday 9am 4pm PST Address Toll Free 1 800 515 2423 Phone 1 702 248 2423 Fax 1 702 248 2623 Store Location Model 01014The information you see here has been revised from previous listings and overrides all previous information 7 13 10.
Description #2 by MDBattery.com:
Features and Benefits Best Charger for charging all RC Car, RC Airplane and Airsoft battery packs 7.2V, 8.4V, 9.6V and 12V. Universal for any NiMH /NiCd battery packs 7.2V - 12V (6-10 Cells pack) Fast charger with current switch to select either, 0.9A and 1.8A. Delivers full charge within 1 - 2 hours. Charging Current 0.9A for battery packs with capacity from 900mAh -1800mAh. Charging Current 1.8A for battery packs with capacity above 2000mAh. For 3000mAh pack, charging time is 1.5 hours. Smart Charger with automatic voltage detection. Use pulse and negative pulse technology to avoid battery overheating during fast charging, optimized for battery pack's cycle life. Red LED will be on during charging. Automatically charging ending with negative delta V. 4 hour safety timer: Charger will stop charging after 4 hours of operation. Worldwide usage with 120-240V AC With Temperature sensor Safety protection fuse for over current, short circuit & reverse polarity protection. Accessories Included 1 standard Tamiya connector. 1 connector adapter from standard Tamiya to Mini Tamiya. 1 set of alligator clip adapter with standard Tamiya connector on one end. Smart Charger Specification FOR 7.2V-12V NI-MH/NI-CD BATTERY PACK 6-10PCS BATTERY Input: AC100-240V Output: 7.2-12V 0.9or1.8A Operation Instruction Connect battery pack to output connector and plug AC power source. Make sure battery polarity is connected correctly (Red wire is positive) Charger will detect battery voltage automatically, Red LED will be on during charging When battery is fully charged, current will reduce to trickle charging at 50mA, Green LED will be on Battery will be charged at 0.9A or 1.8A constant current, Approximate Charging time is about 1.5hrs for 3000mAh battery,1hr for 1800mAh battery. The charger is designed for faster charging NiCd and NiMH battery packs from 6 to 12V for RC car/Air and Air soft gun. Don't charge battery packs with voltage less than 6V or voltage greater than 12V and capacity smaller than1100mAh. Battery pack must be made by high drain current cell. Please contact your seller for instruction. Mfg is not responsible for any damage and consequent damage by Misusage. Caution The charger is designed for indoor use only. Don't leave the charger unattended during charging. The Charger should be positioned horizontally and work in well ventilated condition, avoid water and keep away from flammable explosive goods. Don't cover the charger when charging, ambient temperature shall not be more than 40oC Don't touch the plug. Don't leave the batteries and chargers on wood surface or carpet. Cut off the power supply before connect or disconnect the charger with batteries. Don't try to disassemble the charger, High voltage inside, danger!
Description #3 by eBay:
Untitled Document PRODUCT SEARCH: Search Titles Descriptions Visit my eBay store Add this store to favorites Tenergy Smart Universal Pack Charger (7.2v-12v) + 7.2v 5000mah NiMH Battery Pack Specifications Description This listing contains: 1 x Tenergy Universal Smart Battery Pack Charger (7.2v-12v) 1 x Tenergy 7.2v (6S) 5000mah NiMH Battery Pack w/ Tamiya Connector Smart Universal Charger (for NiMH / NiCd Battery pack 7.2V - 12V) with charging current Selection Features: Best Charger for chargi
(3)
(17)